1.Introduction
The high gloss VCM film laminated steel sheet for refrigerator doors panel is an exquisite decorative steel plate that can be used in many home appliances.
2.Technical Data
Base metal |
Could choose cold rolled steel, galvanized steel, or aluminum alloy sheet and other metal sheets. |
Base metal thickness |
0.3mm ~1.0mm |
Color film |
PVC/PVC+PET film lamianted metal sheet |
Thickness of Color film |
0.04mm ~0.19mm |
Back paint |
Could choose polyester paint, epoxy paint, conductive paint, transparent paint, etc. |
Use of Back paint |
Base metal thickness below 1.0mm can choose back paint or not; Base metal thickness between 1.0mm and 2.0mm has no back paint. |
Protective film |
Could choose self adhesive protective film or non-glue protective film. |
Supplying status |
Plate packing: width≤1360 mm, length≤5000mm; Coil packing: width≤1360 mm, N.W≤5 T, ID: 510 mm. |
3.Product line
1. Uncoiling
2. Joining
3. Pretreatment
4. Chemical treatment
5. Glue coating
6. Curing
7. PVC film laminating
8. Protective film laminating
9. Recoiling
10. Shearing
11. Auo stacking
4.Testing Equipment
1. Cup drawing tester
2. T-bend tester
3. Salt spray tester
4. Impact testing apparatus
5. Tensile-strengh tester
6. Hardness tester
7. Golss tester
8. Surface Roughness Tester
9. Protective film viscosity tester
http://www.himeimetal.com/